Mix Leoseal R with damp sand in the ratio of 1:1 by volume to produce a mortar.Ĭompact the material into the crack and smooth off the surface with a trowel. Prime the sides of the crack with a brush coat of Leoseal R. Pour Leoseal R into the crack using a spouted can.Īny surplus on the surface should be brushed or squeegeed out to a thin film and dusted over after drying with cement or very fine sand to remove the tack. When backfilling is necessary the Leoseal R treatment should not be left longer than 3-4 weeks before this is undertaken. When finished, wash brushes with Leoclean immediately followed by soapy water. If the surface is hot, very dry or absorbent it may be helpful to first prime the surface with a thin coat of Leoseal R diluted in a ratio of 1 part water to 8 parts Leoseal R. The first coat should be at a rate of 0.55L/m² with the second applied at right angles at a rate of 0.45L/m². Stir contents of the bucket prior to use.Īpply Leoseal R in two coats using a turks head brush.
0 kommentar(er)
